Konfiguration/Eigenes WLAN

Warnung! Nur für Fortgeschrittene!

Mit folgender Konfiguration kann man einen TP-Link TP-WL1043ND durch zwei VLANs über Ethernet-Kabel sowohl mit FFKI-Mesh-Netz versorgen als auch als Access-Point für ein eigenes WLAN benutzen.

# /etc/config/network
config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config switch
	option name 'rtl8366rb'
	option reset '1'
	option enable_vlan '1'
	option enable_vlan4k '1'

config switch_vlan
	option device 'rtl8366rb'
	option vlan '1'
	option ports '1 2 3 4 5t'

config switch_vlan
	option device 'rtl8366rb'
	option vlan '2'
	option ports '0t 5t'

config switch_vlan
	option device 'rtl8366rb'
	option vlan '3'
	option ports '0t 5t'

config interface 'wan'
	option ifname 'eth0.2'
	option proto 'dhcp'
	option type 'bridge'
	option accept_ra '0'
	option auto '1'
	option macaddr '<nimmdeineeigene-1>'

config interface 'freifunk'
	option ifname 'eth0.1 bat0'
	option type 'bridge'
	option proto 'none'
	option auto '1'
	option accept_ra '1'
	option macaddr '<nimmdeineeigene-2>'

config interface 'mesh'
	option proto 'batadv'
	option mesh 'bat0'
	option mtu '1528'

config interface 'mesh_lan'
	option ifname 'eth0.3'
	option proto 'batadv'
	option mesh 'bat0'

# /etc/config/wireless

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '11'
	option macaddr '<nimmdeineeigene-2>'
	option hwmode '11ng'
	list ht_capab 'SHORT-GI-40'
	list ht_capab 'DSSS_CCK-40'
	option htmode 'HT40-'
	option country 'DE'

config wifi-iface 'wifi_freifunk'
	option device 'radio0'
	option network 'freifunk'
	option mode 'ap'
	option ssid 'http://kiel.freifunk.net/'

config wifi-iface 'wifi_mesh'
	option device 'radio0'
	option network 'mesh'
	option mode 'adhoc'
	option ssid '02:ca:ff:ee:ba:be'
	option bssid '02:ca:ff:ee:ba:be'
	option mcast_rate '12000'

config wifi-iface 'wifi_ap'
	option device 'radio0'
	option network 'wan'
	option mode 'ap'
	option ssid 'meineEigeneKomischeSSID'
	option encryption 'psk2'
	option key 'WPA2-PSK-Key-fuer-meineEigeneKomischeSSID'